• Skip to content
  • Skip to primary sidebar
  • Skip to footer

DIY AUDIO BLOG, AUDIO WORKSHOP

DIY Audio, projects, schematics, PCB's, designs, electronics, mods

Header Right

  • Index
  • Blog
  • About

Low-noise Power Supply

February 22, 2018 by Ventsislav Simonov Leave a Comment

Here is a quick article describing a low-noise power supply for low current applications. It’s simple, and easy to build. All parts are widely available and cheap. I’m using this power supply to power-up my RIAA preamplifier. It’s more that capable of delivering excellent results. Build one and try it for yourself.

First of all lets see the basic functional diagram of the regulator.

Positive voltage regulator:

Error Amplifier Low-Noise

[Read more…] about Low-noise Power Supply

Filed Under: Measurements, Power supplies, RIAA, Schematics

ECC88 Preamplifier / buffer

September 16, 2016 by Ventsislav Simonov 6 Comments

This is a quick entry to demonstrate a simple topology used in this ECC88 preamplifier. I’m using 7V heater variant – PCC88. It seems like the term “preamp” is not quite suitable here because the stage is actually a buffer and there is no amplification whatsoever. The schematic is shown below:

ecc88_preamp [Read more…] about ECC88 Preamplifier / buffer

Filed Under: PCB's, Preamps, Tubes Tagged With: ECC88, PCB, PREAMPLIFIER, TUBES

Thorens Power Supply Upgrade TD-150, TD-160

June 4, 2016 by Ventsislav Simonov 3 Comments

pcbThis is a very neat and nice PCB upgrade for Thorens turntables. It’s possible to use it with almost every other turntable that includes 16 to 24 pole synchronous motor.

The idea was to have a small PCB which includes both protection and power-off function. The PCB itself is a one-sided board with black solder mask on both top and bottom layers. I’ve decided to include optional drills for other capacitor sizes. This will make it possible to “adjust” the board for other Thorens models of even other turntable makes like Linn or Ariston. [Read more…] about Thorens Power Supply Upgrade TD-150, TD-160

Filed Under: PCB's, RIAA

50Hz Strobe Light. BASCOM-AVR Project

April 24, 2016 by Ventsislav Simonov Leave a Comment

50 Hz BASCOM-AVR stroboscope light for turntable speed check. This project will show you how to create a simple and reliable stroboscope light for your turntable using simple Bascom code and the Attiny-25 MCU by Atmel. In order to complete the task we need to generate a 50Hz PWM signal using the built-in timer – Timer 0. An external crystal is used to provide the reference clock – 6.5536MHz

[Read more…] about 50Hz Strobe Light. BASCOM-AVR Project

Filed Under: Digital, PCB's, RIAA

Multisim Blue. New Free PCB Design Software

September 25, 2014 by Ventsislav Simonov Leave a Comment

As it seems NI’s new Multisim Blue is coming.

Multisim Blue

It promises some very nice features for a FREE software. Cant wait to try this one out!!! Tons of components and extensive libraries. The on-line library update looks interesting as well. I only hope that the simulation tool is as good as is the one from the non-free packages.

 

More info on the upcoming software – HERE

 

 

Filed Under: Uncategorized

  • Page 1
  • Page 2
  • Page 3
  • …
  • Page 25
  • Next Page »

Primary Sidebar

November 2026
M T W T F S S
« Feb    
 1
2345678
9101112131415
16171819202122
23242526272829
30  

Subscribe

Enter your email address:

Delivered by FeedBurner

Popular Posts

  • ESS ES9023 SABRE DAC BOARD 30 comments
  • Diamond Buffer Headphone Amplifier 22 comments
  • uPC1237 Amplifier/Speaker Protection Module 16 comments
  • TPA6120 Headphone Amplifier – COMPOSITE TOPOLOGY 13 comments
  • DIR9001+TDA1541A Classic NOS DAC 13 comments

Recent Posts

  • Low-noise Power Supply
  • ECC88 Preamplifier / buffer
  • Thorens Power Supply Upgrade TD-150, TD-160
  • 50Hz Strobe Light. BASCOM-AVR Project
  • Multisim Blue. New Free PCB Design Software

Archives

  • ► 2018 (1)
    • ► February (1)
      • Low-noise Power Supply
  • ► 2016 (3)
    • ► September (1)
      • ECC88 Preamplifier / buffer
    • ► June (1)
      • Thorens Power Supply Upgrade TD-150, TD-160
    • ► April (1)
      • 50Hz Strobe Light. BASCOM-AVR Project
  • ► 2014 (3)
    • ► September (1)
      • Multisim Blue. New Free PCB Design Software
    • ► July (1)
      • LM317 Constant Current Calculator, Tool
    • ► March (1)
      • LME49811 + THERMALTRAK AMPLIFIER AND SERVO CONTROL – PART 1
  • ► 2013 (22)
    • ► April (6)
      • Simple JFET Preamp
      • Soft start, Speaker Protection by Audio Workshop
      • Art For Engineers
      • Original and Reproduced Audio
      • Unico CD Primo. High Fidelity of High Pleasantness?
      • Testing Power Supplies
    • ► March (4)
      • Grounding System In Power Amplifiers
      • Amplifiers, Oscillation, Stability. BJT CIrcuits
      • Power Amplifier Design by P. Baxandall Part 2. Negative-feedback Concepts.
      • AES On SPDIF Interface For Audio
    • ► February (8)
      • Voltage Coefficient of Resistors
      • Mixing Signal Grounding Guide
      • Transformer Design Considerations
      • Tube Manual by Western Electric - part 3
      • VIA Interconecting Holes Guidelines
      • Tube Manual by Western Electric - part 2
      • Tube Manual by Western Electric
      • Jitter Estimating
    • ► January (4)
      • Notes on Digital Audio
      • Power Amplifier Design Considerations by P. Baxandall
      • Amplifier Simulation And Modeling
      • Record Dyanmic Range Database
  • ► 2012 (89)
    • ► December (8)
      • RIAA Considerations
      • MUSIC: Blue Coast Collection Part 2
      • Google+ DIY Audio Community
      • Analog Isolation
      • Small-Signal Distortion. Amplifiers. Audio.
      • Voltage Regulators, Low Noise, Audio
      • Simple DIY Bench Power Supply
      • Nested Differentiating Feedback in Amplifiers
    • ► November (11)
      • Improving a Power Amplifier by Edward Cherry
      • DIY Stencils At Home
      • PCM2706 + TDA1543 x 4 DAC SCHEMATIC
      • Input Bias Current + JFET's
      • Improved Cable Simulations
      • LME49810 HIGH-POWER By Bis. High-End
      • Ultra-Low Noise Voltage Regulator by Zetex
      • The Truth about Jitter
      • Tubes: 12B4 Single Stage Preamplifier.
      • Amplifier Shematic Collection
      • uPC1237 Amplifier/Speaker Protection Module
    • ► October (10)
      • Optocoupler Replacement Isolators
      • Audio DAC Jitter Sensitivity
      • Cables, Speakers and Amplifiers
      • Acoustics: Distortion and Perception. THD.
      • Acoustics: Sound-Absorbing Materials
      • Distortion + Audio Amplifiers - Measurements.
      • Low Value Capacitance Meter
      • TUBES - Non Linear Distortion
      • Universal I2S interface. Line + cable
      • Discrete I/V For Current Output DAC's. AES Publication.
    • ► September (8)
      • LME49810 + uPC1237 Audio Amplifier
      • Balanced vs. Unbalanced Interconnections
      • Phase Noise Jitter Calculator
      • More Cable Stuff - Cable Distortion
      • Skin Effect + Audio Cables
      • Supply Decoupling Layout, PCB, DIGITAL
      • I/V conversion & differential analog stages, filters
      • Low Noise Audio Input Stages - DN11, Zetex
    • ► August (21)
      • The Cathode Bypass Capacitor Explained
      • USB PCB Design Considerations And Guidelines
      • hosted
      • Altec 604-8G Monitor Drivers. Cabinets making. Work In Progress.
      • Low jitter isolators for DAC's. 50ps typical RMS
      • Mixed Signal Design. PCB Layout.
      • Mixed Signal Design
      • Jitter: Specification And Assessment. Digital Audio
      • Ultrapath Line Amplifier - Jack Elliano
      • Multisim Inverse RIAA Function
      • PCM5102 - The ES9023 Rival
      • Ultra High Performance Audio DAC
      • 1-bit Sigma-Delta DAC's and High-Quality Applications
      • Designing RC Snubber Networks
      • Voltage Regulators Noise Reduction
      • Low Noise, Low Distortion Filters
      • AES/EBU, SPDIF Digital Audio Interface
      • Stepped Attenuators
      • Ultra Low Noise Stages
      • Skin Effect Simulating And Modeling. Cables, Transmission Lines.
      • Electrical Fundamentals.Vacuum Triodes.
    • ► July (27)
      • Loudspeaker Enclosure Design - by John Kormylo
      • I/V stage with current feedback amplifier CFB op-amps
      • PCM1704, AD1862 DAC, NOS, DIY schematic
      • PHONES-01 Headphone Amplifier by Gary Galo
      • BUF634 Headphone Amplifier, Driver. PCB Project.
      • Precision voltage references - Perry Miller, Doug Moore
      • MUSIC: Fiona Joy Hawkins - Blue Dream SACD
      • Op-amp High Performance Buffers - Part 2
      • Opamp Circuits. Basic And Advanced.
      • Opamp High Performance Buffers - Part 1
      • A Discrete Operational Amlifier For Audio / Discrete op-amp
      • I/V For High-resolution DACs - M.O.J. Hawksford
      • Reclocking for TDA1541 CD players
      • A Simple Class A JFET Operational Amplifier
      • Composite Op Amp Gives You The Best of Both Worlds
      • ESS Technology SABRE DACs - Martin Mallinson on RMAF 11
      • Power Amplifer Using MOSFETs
      • IL715 Digital Isolator PCB
      • OPA2188 Operational Amplifier
      • Headphone Amplifier by Tao Kurohane
      • CS4398 + PGA2320 DAC Board
      • loading surface mount IC's
      • Ultra-Low-Noise LDO
      • Single Supply Op-amp design
      • EAGLE TIPS - Better PCB's in EAGLE
      • AutoCAD to EAGLE PCB Drawing Import
      • ESS ES9023 SABRE DAC BOARD
    • ► June (1)
      • Unbalanced to Balanced Converter For Audio With DRV134
    • ► April (1)
      • Cadsoft EAGLE - Image And Logo Adding To PCB
    • ► February (1)
      • TDA2050 - High -end version. The Gainclone Rival.
    • ► January (1)
      • SSM2017 Line Preamplifier - High Quality Design
  • ► 2011 (7)
    • ► November (1)
      • Diamond Buffer Headphone Amplifier
    • ► October (1)
      • TPA6120 Headphone Amplifier - COMPOSITE TOPOLOGY
    • ► September (5)
      • ECC85 RIAA Preamplifier
      • DIY USB Isolator Made Easy
      • DIR9001+TDA1541A Classic NOS DAC
      • Low Jitter Clock For CD Player - Upgrade Module
      • The V.S. REF RIAA Phono Preamplifier - SSM2017 Based Project

Categories

  • Acoustics (3)
  • Cables (7)
  • CD players (3)
  • Chip Amplifiers (2)
  • DAC (17)
  • Digital (24)
  • Headphone Amplifiers (5)
  • Jitter (6)
  • Measurements (3)
  • MUSIC (4)
  • Op-amps (15)
  • PCB's (15)
  • Performance (5)
  • Power supplies (15)
  • Preamps (5)
  • Prototyping (1)
  • RIAA (8)
  • Schematics (6)
  • Solid state (16)
  • Speakers (3)
  • Transistors (8)
  • Tubes (10)
  • Uncategorized (15)

Footer

RSS

Follow Us on Twitter And Facebook


Privacy Policy
Therms And Conditions
Contact Us

© 2018 AUDIO WORKSHOP · All Rights Reserved · Powered by WordPress · Built on the Genesis Framework